Resource Persons

 Resource persons from reputed industries and academic institutions will deliver technical talks on 3D Printing and Design in various field of application. The experts are:

Dr. Mamilla Ravi Sankar

Associate Professor

IIT Tirupati

Dr. S. Kanmani Subbu

Assistant Professor

IIT Palakkad

Dr. Y Ravi Kumar

Associate Professor

NIT Warangal

Mr. Vinod Kumar V

Engineer F

SCTIMST Trivandrum

Dr. Sreekanth M P

Assistant Professor

VJEC Chemperi, Kannur

Mr. Adhil Munna

CEO

CLOODOT

Dr. Lijo Paul

Dean PG

SJCET Palai

FACULTY

DEVELOPMENT

PROGRAMME

Additive Manufacturing & 3D Printing

 

12, 13 & 14 July 2021

Download Brochure

Funded by

Organised by

APJ Abdul Kalam

Technological University,

Kerala

Department of Mechanical Engineering

St. Joseph's College of Engineering & Technology

Palai

About Programme

Additive manufacturing (AM), universally known as 3D printing, is transforming how products are designed, produced, and serviced. AM enables on-demand production without dedicated equipment or tooling, unlocks digital design tools, and offers breakthrough performance and unparalleled flexibility across industries. But knowledge remains one of the greatest barriers to AM's wider adoption.

The creation of a 3D printed object is achieved using additive processes. In an additive process an object is created by laying down successive layers of material until the object is created. Each of these layers can be seen as a thinly sliced cross-section of the object. 3D printing is the opposite of subtractive manufacturing which is cutting out / hollowing out a piece of metal or plastic with for instance a milling machine. 3D printing enables you to produce complex shapes using less material than traditional manufacturing methods.

This programme provides an opportunity to perform research in 3D printing for various applications. The programme also tends to provide a forum for academic expert, industry experts and research scholars to exchange and share their experiences and innovations about all aspects of 3D Printing. This workshop paves a path to understand the principle of Additive Manufacturing in a real time scenario.

 

Programme Objectives

The course is designed to impart knowledge and skills related to 3D printing technologies especially in bio-medical devices, selection of material and equipment and develop a product using this technique in Industry 4.0 environment. In addition, the course helps

  •   To explore the state-of-the-art technologies in 3D Printing.
  •   To apprise the participants of emerging trends in 3D Printing technology.
  •   To bridge the gap between academic learning and industry demands in the field of 3D printing technology.
  •   To enable the participants to have experiential learning in 3D modelling and build-setup.
  •   To enable participants to learn the industrial, real life and pedagogical applications of 3D printing.
  •   To facilitate the participants to develop low- cost 3D printers to teach engineering concepts.
  •   To empower the participants to offer a course on 3D printing technology at their respective Institutions.

Programme Coordinators

Mr. Pradeep P V

Assistant Professor

Dept. of ME, SJCET Palai

+91 94956 08508

pradeep@sjcetpalai.ac.in

Dr. Lijo Paul

Dean PG

Dept. of ME, SJCET Palai

+91 98462 70462

lijo.paul@sjcetpalai.ac.in

SJCET

The establishment of St. Joseph’s College of Engineering and Technology, Palai,  managed by the diocese of Palai, was the fulfillment of a long cherished dream of providing facilities for higher education in engineering and technology. The college has developed a distinct identity and character, where education and training are imparted in a truly holistic way.

 The college aims to provide an education that WORKS! – education that helps the students in ensuring a challenging and satisfying career after the graduation. The college is dedicated to preserve the Eco-systems and live in harmony with nature. SJCET follows a strategic planning approach to development insisting on Total Quality Management and continuous improvement at all levels. The college have a team of well-qualified, dedicated and trained teachers and follow the most innovative teaching-learning processes. The laboratories and other facilities are adjudged as one of the best among the engineering colleges in Kerala.

Departmet of Mechanical Engineering

The Department of Mechanical Engineering is committed to excellence in research, teaching, and service to the community. The department had its start along with the inception of the college in the year 2002. The department has the unique identity with:

→ B.Tech Program in Mechanical Engineering is accredited by NBA.

→ M.Tech Program in Advanced Manufacturing and Production Management.

→ Well-equipped laboratories having facilities even beyond the curriculum of UG and PG programmes.

→ Follows outcome based teaching learning (OBTL) process.

→ Faculty members having long term teaching as well as industrial experiences

→ APJAKTU Research Centre with in the fields of manufacturing and thermal engineering.

→ Ongoing Ph. D works as well as funded projects

→ Majestic alumni who adjoin the department through technical and well as employment opportunity supports.

Programme

Schedule

Date Session No. Time* Topic Resource Person
July 12 9:00 AM – 9:30 AM Inauguration
1 9:30 AM – 11:30 AM Various Additive Manufacturing Technologies Dr. Mamilla Ravi Sankar
2 12.00 PM –1:30 PM Additive Manufacturing: Possibilities of user involved product development Dr. Sreekanth M P
3 2:00 PM – 4:00 PM Hardware using 3D Printer Mr. Adhil Munna
July13 4 9:00 AM – 11:00 AM Research in Additive Manufacturing Dr. S. Kanmani Subbu
5 11:30 AM – 1:30 PM Virtual demo on Cura Software Insta 3D Software Company
6 2:00 PM – 4:00 PM Virtual demo on ideaMaker software Insta 3D Software Company
July 14 7 9:00 AM – 11:00 AM Metal 3D Printing Dr. Y Ravi Kumar
8 11:30 AM – 1:30 PM Application of Additive Manufacturing in Medical Devices Mr. Vinod Kumar V
9 2:00 PM – 4:00 PM Research in RP Dr. Lijo Paul
04:00 PM FeedBack
*Timings may change tentatively

Programme Prerequisites

  • Faculty of AICTE approved educational institutions affiliated to APJ Abdul Kalam Technological University, Kerala, Research Scholars and M.Tech students are eligible to participate.
  • Online FDP Programme will be conducted in Google Meet platform.
  • There is no registration fees for the course.
  • Maximum number of participants is limited to 60. Therefore, participants will be selected on first-come first-serve basis.
  • Signed application form (with seal) / confirmation Email from the head of the institution is required for successful completion of registration for participation.
  • Selected candidates will be intimated by e-mail.
  • Online participation attendance is mandatory for successful completion of FDP.

Follow us:

Made with Passion by JosE ToM

Funded by

APJ Abdul Kalam

Technological University,

Kerala

Organised by

Department of Mechanical Engineering

St. Joseph's College of Engineering & Technology

Palai

About Programme

Additive manufacturing (AM), universally known as 3D printing, is transforming how products are designed, produced, and serviced. AM enables on-demand production without dedicated equipment or tooling, unlocks digital design tools, and offers breakthrough performance and unparalleled flexibility across industries. But knowledge remains one of the greatest barriers to AM's wider adoption.

The creation of a 3D printed object is achieved using additive processes. In an additive process an object is created by laying down successive layers of material until the object is created. Each of these layers can be seen as a thinly sliced cross-section of the object. 3D printing is the opposite of subtractive manufacturing which is cutting out / hollowing out a piece of metal or plastic with for instance a milling machine. 3D printing enables you to produce complex shapes using less material than traditional manufacturing methods.

This programme provides an opportunity to perform research in 3D printing for various applications. The programme also tends to provide a forum for academic expert, industry experts and research scholars to exchange and share their experiences and innovations about all aspects of 3D Printing. This workshop paves a path to understand the principle of Additive Manufacturing in a real time scenario.

 

Programme Objectives

The course is designed to impart knowledge and skills related to 3D printing technologies especially in bio-medical devices, selection of material and equipment and develop a product using this technique in Industry 4.0 environment. In addition, the course helps

  •   To explore the state-of-the-art technologies in 3D Printing.
  •   To apprise the participants of emerging trends in 3D Printing technology.
  •   To bridge the gap between academic learning and industry demands in the field of 3D printing technology.
  •   To enable the participants to have experiential learning in 3D modelling and build-setup.
  •   To enable participants to learn the industrial, real life and pedagogical applications of 3D printing.
  •   To facilitate the participants to develop low- cost 3D printers to teach engineering concepts.
  •   To empower the participants to offer a course on 3D printing technology at their respective Institutions.

Programme Coordinators

Date Session No. Time* Topic Resource Person
July 12 9:00 AM – 9:30 AM Inauguration
1 9:30 AM – 11:30 AM Various Additive Manufacturing Technologies Dr. Mamilla Ravi Sankar
2 12.00 PM –1:30 PM Additive Manufacturing: Possibilities of user involved product development Dr. Sreekanth M P
3 2:00 PM – 4:00 PM Hardware using 3D Printer Mr. Adhil Munna
July13 4 9:00 AM – 11:00 AM Research in Additive Manufacturing Dr. S. Kanmani Subbu
5 11:30 AM – 1:30 PM Virtual demo on Cura Software Insta 3D Software Company
6 2:00 PM – 4:00 PM Virtual demo on ideaMaker software Insta 3D Software Company
July 14 7 9:00 AM – 11:00 AM Metal 3D Printing Dr. Y Ravi Kumar
8 11:30 AM – 1:30 PM Application of Additive Manufacturing in Medical Devices Mr. Vinod Kumar V
9 2:00 PM – 4:00 PM Research in RP Dr. Lijo Paul
04:00 PM FeedBack
*Timings may change tentatively

Resource Persons

 Resource Person from reputed Industries and Academic Institutions will deliver lectures on 3D Printing and Design in various field of application. The experts are:

FACULTY

DEVELOPMENT

PROGRAMME

 

12, 13 & 14 July 2021

Additive Manufacturing &

3D Printing

The establishment of St. Joseph’s College of Engineering and Technology, Palai, managed by the diocese of Palai, was the fulfillment of a long cherished dream of providing facilities for higher education in engineering and technology. The college has developed a distinct identity and character, where education and training are imparted in a truly holistic way.

 The college aims to provide an education that WORKS! – education that helps the students in ensuring a challenging and satisfying career after the graduation. The college is dedicated to preserve the Eco-systems and live in harmony with nature. SJCET follows a strategic planning approach to development insisting on Total Quality Management and continuous improvement at all levels. The college have a team of well-qualified, dedicated and trained teachers and follow the most innovative teaching-learning processes. The laboratories and other facilities are adjudged as one of the best among the engineering colleges in Kerala.

Department of

Mechanical Engineering

The Department of Mechanical Engineering is committed to excellence in research, teaching, and service to the community. The department had its start along with the inception of the college in the year 2002. The department has the unique identity with:

  • B.Tech Program in Mechanical Engineering is accredited by NBA.
  • M.Tech Program in Advanced Manufacturing and Production Management.
  • Well-equipped laboratories having facilities even beyond the curriculum of UG and PG programmes.
  • Follows outcome based teaching learning (OBTL) process.
  • Faculty members having long term teaching as well as industrial experiences
  • APJAKTU Research Centre with in the fields of manufacturing and thermal engineering.
  • Ongoing Ph. D works as well as funded projects
  • Majestic alumni who adjoin the department through technical and well as employment opportunity supports.
Date Session No. Time* Topic Resource Person
July 12 9:00 AM – 9:30 AM Inauguration
1 9:30 AM – 11:30 AM Various Additive Manufacturing Technologies Dr. Mamilla Ravi Sankar
2 12.00 PM –1:30 PM Additive Manufacturing: Possibilities of user involved product development Dr. Sreekanth M P
3 2:00 PM – 4:00 PM Hardware using 3D Printer Mr. Adhil Munna
July13 4 9:00 AM – 11:00 AM Research in Additive Manufacturing Dr. S. Kanmani Subbu
5 11:30 AM – 1:30 PM Virtual demo on Cura Software Insta 3D Software Company
6 2:00 PM – 4:00 PM Virtual demo on ideaMaker software Insta 3D Software Company
July 14 7 9:00 AM – 11:00 AM Metal 3D Printing Dr. Y Ravi Kumar
8 11:30 AM – 1:30 PM Application of Additive Manufacturing in Medical Devices Mr. Vinod Kumar V
9 2:00 PM – 4:00 PM Research in RP Dr. Lijo Paul
04:00 PM FeedBack
*Timings may change tentatively

Follow us: